• 1/2" shank is made for wet cabinet CNC machines
    • 3.375" overall length (without polarizer or boot)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes dual polarizing attachment to minimize the thickness of the lines
    • Includes vinyl boot
    The Laser Center/Edge Finder™ is a tool for your CNC machine that saves setup time. It eliminates the frustrations and doubts of using the century-old indirect method with a conventional edge finder or wiggler. The vinyl boot and machined flange on this model create a water-proof seal. The boot slides over the Laser Center/Edge Finder™ (with the polarizer removed) so you can leave it in your cabinet CNC tool rack. The Laser Center/Edge Finder™ projects a crosshair, making it easy to align a workpiece on the table. The unit comes with a dual polarizer attachment to allow the user to minimize the thickness of the lines for added accuracy. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That is about 6 months to a year of normal use.
    • 1/2" shank is made for wet cabinet CNC machines
    • 3.375" overall length (without polarizer or boot)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes polarizing attachment to minimize the size of the dot
    • Includes vinyl boot
    The Laser Center/Edge Finder™ is a tool for your CNC machine that saves setup time. It eliminates the frustrations and doubts of using the century-old indirect method with a conventional edge finder or wiggler. The vinyl boot and machined flange on this model create a water-proof seal. The boot slides over the Laser Center/Edge Finder™ (with the polarizer removed) so you can leave it in your cabinet CNC tool rack. The Laser Center/Edge Finder™ projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder. You can also use the Laser Center/Edge Finder™ to locate a scribed or center-punched location. Simply move the laser beam to the location on the workpiece and the spindle is aligned. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That is about 6 months to a year of normal use.
  • • 6 mm shank made for waterjet machines with 6 mm nozzle (i.e. KMT) • Split shank allows the unit to slip over the nozzle • 3.375" overall length (without polarizer) • 3/4" overall diameter • Uses three common LR44 batteries (included) • Repeatable Accuracy of .001" (estimated) • Includes dual polarizing attachment to minimize the thickness of the lines The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a crosshair, making it easy to align a workpiece on the table. The unit comes with a dual polarizer attached to allow the user to minimize the thickness of the lines for added accuracy. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
  • • .6 mm shank made for waterjet machines with .6mm nozzle • Split shank allows the unit to slip over the nozzle. • 3.375" overall length (without polarizer) • 3/4" overall diameter • Uses three common LR44 batteries (included) • Repeatable Accuracy of .001" (estimated) • Includes polarizing attachment to minimize the size of the dot The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder. You can also use the Laser Center/Edge Finder™ to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
  • • .370 mm shank made for waterjet machines with .370 nozzle (i.e. KMT) • Split shank allows the unit to slip over the nozzle • 3.375" overall length (without polarizer) • 3/4" overall diameter • Uses three common LR44 batteries (included) • Repeatable Accuracy of .001" (estimated) • Includes dual polarizing attachment to minimize the thickness of the lines The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a crosshair, making it easy to align a workpiece on the table. The unit comes with a dual polarizer attached to allow the user to minimize the thickness of the lines for added accuracy. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
  • • .370 mm shank made for waterjet machines with .370 nozzle (i.e. KMT) • Split shank allows the unit to slip over the nozzle. • 3.375" overall length (without polarizer) • 3/4" overall diameter • Uses three common LR44 batteries (included) • Repeatable Accuracy of .001" (estimated) • Includes polarizing attachment to minimize the size of the dot The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder. You can also use the Laser Center/Edge Finder™ to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
    • .312 mm shank made for waterjet machines with .312 nozzle (i.e. Omax)
    • Split shank allows the unit to slip over the nozzle
    • 3.375" overall length (without polarizer)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes dual polarizing attachment to minimize the thickness of the lines
    The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a crosshair, making it easy to align a workpiece on the table. The unit comes with a dual polarizer attached to allow the user to minimize the thickness of the lines for added accuracy. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
    • .312 mm shank made for waterjet machines with .312 nozzle (i.e. Omax)
    • Split shank allows the unit to slip over the nozzle.
    • 3.375" overall length (without polarizer)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes polarizing attachment to minimize the size of the dot
    The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder. You can also use the Laser Center/Edge Finder™ to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
    • .281 mm shank made for waterjet machines with .281 nozzle (i.e. Flow)
    • Split shank allows the unit to slip over the nozzle
    • 3.375" overall length (without polarizer)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes dual polarizing attachment to minimize the thickness of the lines
    The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a crosshair, making it easy to align a workpiece on the table. The unit comes with a dual polarizer attached to allow the user to minimize the thickness of the lines for added accuracy. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
    • .281 mm shank made for waterjet machines with .281 nozzle (i.e. Flow)
    • Split shank allows the unit to slip over the nozzle.
    • 3.375" overall length (without polarizer)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes polarizing attachment to minimize the size of the dot
    The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder. You can also use the Laser Center/Edge Finder™ to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
    • .281 mm shank made for waterjet machines with .281 nozzle (i.e. Flow)
    • Solid shank requires the removal of the nozzle
    • 3.375" overall length (without polarizer)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes dual polarizing attachment to minimize the thickness of the lines
    The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a crosshair, making it easy to align a workpiece on the table. The unit comes with a dual polarizer attached to allow the user to minimize the thickness of the lines for added accuracy. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
    • .281 mm shank made for waterjet machines with .281 nozzle (i.e. Flow)
    • Solid shank requires the removal of the nozzle
    • 3.375" overall length (without polarizer)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes dual polarizing attachment to minimize the thickness of the lines
    The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a crosshair, making it easy to align a workpiece on the table. The unit comes with a dual polarizer attached to allow the user to minimize the thickness of the lines for added accuracy. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.