• .281 mm shank made for waterjet machines with .281 nozzle (i.e. Flow)
    • Split shank allows the unit to slip over the nozzle.
    • 3.375" overall length (without polarizer)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes polarizing attachment to minimize the size of the dot
    The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder. You can also use the Laser Center/Edge Finder™ to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
    • .281 mm shank made for waterjet machines with .281 nozzle (i.e. Flow)
    • Solid shank requires the removal of the nozzle
    • 3.375" overall length (without polarizer)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes dual polarizing attachment to minimize the thickness of the lines
    The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a crosshair, making it easy to align a workpiece on the table. The unit comes with a dual polarizer attached to allow the user to minimize the thickness of the lines for added accuracy. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
    • .281 mm shank made for waterjet machines with .281 nozzle (i.e. Flow)
    • Split shank allows the unit to slip over the nozzle
    • 3.375" overall length (without polarizer)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes dual polarizing attachment to minimize the thickness of the lines
    The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a crosshair, making it easy to align a workpiece on the table. The unit comes with a dual polarizer attached to allow the user to minimize the thickness of the lines for added accuracy. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
    • .250 mm shank made for waterjet machines with .250 nozzle (i.e. Jet Edge)
    • Split shank allows the unit to slip over the nozzle.
    • 3.375" overall length (without polarizer)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes polarizing attachment to minimize the size of the dot
    The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder. You can also use the Laser Center/Edge Finder™ to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
    • .281 mm shank made for waterjet machines with .281 nozzle (i.e. Flow)
    • Solid shank requires the removal of the nozzle
    • 3.375" overall length (without polarizer)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes dual polarizing attachment to minimize the thickness of the lines
    The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a crosshair, making it easy to align a workpiece on the table. The unit comes with a dual polarizer attached to allow the user to minimize the thickness of the lines for added accuracy. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
    • .312 mm shank made for waterjet machines with .312 nozzle (i.e. Omax)
    • Split shank allows the unit to slip over the nozzle.
    • 3.375" overall length (without polarizer)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes polarizing attachment to minimize the size of the dot
    The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder. You can also use the Laser Center/Edge Finder™ to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
  • • .370 mm shank made for waterjet machines with .370 nozzle (i.e. KMT) • Split shank allows the unit to slip over the nozzle. • 3.375" overall length (without polarizer) • 3/4" overall diameter • Uses three common LR44 batteries (included) • Repeatable Accuracy of .001" (estimated) • Includes polarizing attachment to minimize the size of the dot The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder. You can also use the Laser Center/Edge Finder™ to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
    • .312 mm shank made for waterjet machines with .312 nozzle (i.e. Omax)
    • Split shank allows the unit to slip over the nozzle
    • 3.375" overall length (without polarizer)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes dual polarizing attachment to minimize the thickness of the lines
    The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a crosshair, making it easy to align a workpiece on the table. The unit comes with a dual polarizer attached to allow the user to minimize the thickness of the lines for added accuracy. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
  • • .370 mm shank made for waterjet machines with .370 nozzle (i.e. KMT) • Split shank allows the unit to slip over the nozzle • 3.375" overall length (without polarizer) • 3/4" overall diameter • Uses three common LR44 batteries (included) • Repeatable Accuracy of .001" (estimated) • Includes dual polarizing attachment to minimize the thickness of the lines The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a crosshair, making it easy to align a workpiece on the table. The unit comes with a dual polarizer attached to allow the user to minimize the thickness of the lines for added accuracy. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
  • • .6 mm shank made for waterjet machines with .6mm nozzle • Split shank allows the unit to slip over the nozzle. • 3.375" overall length (without polarizer) • 3/4" overall diameter • Uses three common LR44 batteries (included) • Repeatable Accuracy of .001" (estimated) • Includes polarizing attachment to minimize the size of the dot The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a fine laser beam that directly indicates the edge of the workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No more calculating half the diameter of the edge finder. You can also use the Laser Center/Edge Finder™ to locate scribed or center-punched locations. Simply move the laser beam to the location on the workpiece and the spindle is aligned. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
    • .250 mm shank made for waterjet machines with .250 nozzle (i.e. Jet Edge)
    • Split shank allows the unit to slip over the nozzle
    • 3.375" overall length (without polarizer)
    • 3/4" overall diameter
    • Uses three common LR44 batteries (included)
    • Repeatable Accuracy of .001" (estimated)
    • Includes dual polarizing attachment to minimize the thickness of the lines
    The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a crosshair, making it easy to align a workpiece on the table. The unit comes with a dual polarizer attached to allow the user to minimize the thickness of the lines for added accuracy. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
  • • 6 mm shank made for waterjet machines with 6 mm nozzle (i.e. KMT) • Split shank allows the unit to slip over the nozzle • 3.375" overall length (without polarizer) • 3/4" overall diameter • Uses three common LR44 batteries (included) • Repeatable Accuracy of .001" (estimated) • Includes dual polarizing attachment to minimize the thickness of the lines The Laser Center/Edge Finder™ is a tool for your waterjet machine which saves setup time. It eliminates the frustrations and doubts of using the century-old method with a conventional edge finder or wiggler. The Laser Center/Edge Finder™ projects a crosshair, making it easy to align a workpiece on the table. The unit comes with a dual polarizer attached to allow the user to minimize the thickness of the lines for added accuracy. The Laser Center/Edge Finder™ is easy to align, using the four alignment screws, so you can be sure it is always accurate. A target card and allen wrench are included to help with alignment. The batteries last for over 3 hours of continuous operation. That's about 6 months to a year of normal use.
Go to Top